|
The table system is extremely suitable for assembly workplaces, office desks, workbenches or hobbies. The table leg TA ensures great balance and stability of the table even at the highest work position. The tables can be adjusted to any height, which is good for the health of the user. The tables can also be operated while standing due to the large lift length.
 |
|
The system TA is modular and consists of the table leg TA (1), the plate carrier (2), a crossbar (3) and the table feet (4).
The crossbars are positioned so that a roll container can be moved under the table (height 590 mm).
Through combination with the Ergoswiss pump types, up to 10 legs can be adjusted in synchrony. It is possible to implement table frames with a lift length of 150, 200, 300, 400 and 500 mm and a load of 1.000 kg. The table system TA is compatible with actuation by hand crank or an electric motor.
|
TECHNICAL DATA
- Load max. 1500 N per leg
- Load up to 2500 N per leg upon request
- Please observe the max. load of the complete system given in the selection table
- Retracted length 637 mm (TA 1450) and 512 mm (TA 1430)
- Lift 150 to 500 mm (short version up to 300)
- Max. static bending moment Mb = 1.000 Nm
- Max. dynamic bending moment Mb = 150 Nm
- Colour: RAL 9006 white aluminium
- Other models and accessories upon request
Table versions TA
Due to its modular design the TA system can be used in a versatile and flexible way. With just
a few elements, different applications are possible.
 |
|
TA-2: The two-leg system for seated and standing workplaces in the office or at assembly workplaces. Consisting of two table legs, two carrier plates, two table feet and a crossbar for the stabilization of the system. Different table width can be implemented with the crossbars from the standard programme.
TA-3: The three-leg system for corner combinations in the office and at assembly areas. Here the two-leg system with an additional crossbar is extended by a third leg
TA-4: The four-leg system for maximum stability, such as workbenches, plane benches and assembly workplaces. The crossbars in longitudinal direction can be placed in three depth positions.
|
Special: On tables for cable packaging or assembly of long components, the two-leg system can be controlled in serial synchrony. This also permits height adjustment on very long tables.
Up to 10 table legs can be connected at once and adjusted by the PB pump. This means large textile tables, multi-leg tables for the assembly of large components, as well as the adjustment of any size surface, can be implemented.
 Data Sheet System TT
Union Catalogue
Assembly Instruction hydraulic Tubing
Change to Download Area
|
